Lok8u K8SLI Manuel d'utilisateur télécharger pdf (Page 40)

K8SLI

Onboard Device

If you highlight the “Onboard Device” label and then press the enter key, it will take you to a

submenu with the following options:

OnChip USB

This option should be enabled if your system has a USB port installed on the system board. You will

need to disable this feature if you add a higher performance controller.

Options: V1.1+V2.0 (default)、Disabled、V1.1

USB Memory Type

This item allows you to set your USB Memory Type

Options: SHADOW、Bast Memory(640k)(default)

USB Keyboard Support

This item allows you to enable the USB attached keyboards and storages.

Options: Disabled (default)、Enabled

AC97 Audio

This option allows you to control the onboard AC’97 audio.

Options: Enabled (default)、Disabled

MAC Lan

This option allows you to control the onboard LAN device.

Options: Enabled (default)、Disabled

Onboard I/O Chip Setup

If you highlight the “Onboard I/O Chip Setup” label and then press the enter key, it will take you to a

submenu with the following options:

Power On Function

This field allows you to select a way to power on your computer. Options: Password、Hot KEY、

Mouse Left、Mouse Right、Any KEY、BUTTON ONLY (default), and Keyboard 98

Hot Key Power ON

This field allows you to use the Ctrl key along with a hot key (function key) to power on your system.

This field is only configurable when “Power On Function” is set to “Hot Key”.

Options: Ctrl-F1、Ctrl-F2…… Ctrl-F12

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 61 62

Pas de commentaire

Lok8u K8SLI Manuel d'utilisateur Page 40